Click To Go     A  B  C  D  E  F  G

On To Page Two H-Z

Page last updated on 22/06/09

2iC AUSTRALIA PTY LTD
Unit 2/10 McElligott Crt, Canningvale, WA 6155
Phone: 08 9456 4177  Fax: 08 9456 4199
Email: admin@2iCaustralia.com
Website: 2iCaustralia.com
Contact: Brendan Smyth
Mobile: 0427 239 620

A

ABC PRODUCTS (ROCKY) PTY LTD
Lot 164 Maloney Street, North Rockhampton, QLD 4701
Phone: 07 4927 7276  Fax: 07 4927 7059
Email: gmckey@abcrocky.com.au
Contact: Geoff McKey - Director
Mobile: 0407 636 818

ABC PRODUCTS specialise mainly in the supply of drilling and mining supplies to the coal exploration industry. We are agents for AMC drill fluids, Boart Longyear coring equipment and Tyco Plaspipe PVC casing.

ADELAIDE WHEEL AND RIM WORKS / WERNER TOOL COMPANY
308-310 South Road, Richmond, SA 5033
Phone: 08 8352 6266 Fax: 08 8443 7377
After hours: 08 8340 0970 Mobile: 0427 554 100
Email: info@adelaidewheels.com.au

Website: www.adelaidewheels.com.au

Contact: Werner Giehl / Greg White

Manufacturer of API drill rods, subs, stabilisers, swivels, recovery tools, DTH hammers, DTH bits, RC hammers, bits, subs, non-return subs, hollow flight auger systems, DTH bit refurbishing, trenchless pipelaying rods subs. Supply new, repair or restore mining, earthmoving, tractor, truck, forklift, trolley motor vehicle, steel or alloy wheels. Trailer axle, brakes, springs, most components use for trailers. Quality systems.

                

ADTECH FRP PIPELINES
1/345 Victoria Road, Malaga, WA, 6090
Phone: 08 9262 7000 Fax: 08 9249 3966
A/H: 0428 923 089
Contact: Peter St.Clair-Baker
Email: sales@adtechfrp.com
Website: www.adtechfrp.com  

Adtech FRP is ISO 9002 accredited for supply and installation of fibreglass pipe and fittings. Adtech FRP supplies Ameron's Bondstrand® and Centron® Fibreglass casing and pump column in Australia and New Zealand. All our Fibreglass casing and pump column is manufactured in API Q1 Licensed, ISO 9001 registered facilities for reliability, whether the fluid be oil, gas or water.

Available diameters up to 750mm in 6m, 9m or 12m lengths. The precision engineering of Bondstrand® and Centron® products removes the need for double O-rings, pressure testing of joints, and numbering of pipes in sequence. Please call us for any advice.

AFKOS INDUSTRIES PTY LTD
15 Macadam Place Balcatta WA 6021
Phone: 08 9345 4333 Fax 08 9345 4167
Mobile: 0417 950 746- Paul
Email afkos@q-net.net.au
Website: www.afkos.com.au
Contact Paul Afkos
 

Western Australia’s largest manufacturer of high quality wireline drill rods and casing, servicing the diamond drilling industry. Our superior technology complements unique straightness and heat treatment process. Afkos drill rods and casing are proven to be of the highest quality. We manufacture BO, NO, NMO, HO, HMO, HWT and PWT drill rods and casings.

Afkos also has an extensive range of changeover subs, saver subs, inner and outer tubes and universal water swivels.

AGE DEVELOPMENTS PTY LTD 
38 Harris Road, Malaga, WA, 6090
Phone: 08 9209 2844 Fax: 08 9209 2820
Email: age@agedevelopments.com.au
Website: www.agedevelopments.com.au
Contact: Robert Peters

Type of operation: Inflatable packers
Specialist sectors: Waterwell, Blast Hole, Geotechnical, Marine, Mineral exploration, Extractive Industries, Foundation, Environmental, Oil/Gas. Seismic, Site investigation, Quality Systems.

Manufacturers of inflatable packers and associated equipment
AGE Developments Pty Ltd is a Perth based company, dedicated to servicing  the onshore and offshore water. gas, mining & geotechnical investigation industries. The company was founded by Andy Giacomel on the philosophy of providing a complete design, manufacturing & operating service available 24 hrs a day, 7 days a week. We specialise in providing innovative solutions to difficult and unusual problems. Since 1985, by applying enthusiasm, ingenuity & expertise. AGE have consistently produced innovative and cost effective solutions to a broad range of industry problems.

We maintain modern manufacturing and research premises in Perth WA, which are fully equipped to handle all facets of our industry & are staffed by our highly qualified & experienced personnel.

AGE Developments' manufactured product range includes inflatable packers - standard and custom designs; swage packers & casing patches; bridge plugs; AGE riserless pump completion systems: mechanical and geotechnical testing equipment; down hole video inspection services; special application hoses & fittings; hydrostatic pressure testing equipment;  flat, square or rectangular airbags. 

AGE have recently introduced their down hole video inspection service, as part of an ongoing  commitment to providing the Australian Drilling Industry, with access to state of the art waterwell inspection & repair services. AGE have introduced a number of new products aimed specifically at waterwell completion & repairs, including casing packers -the one-shot completion systems; slip-over packers for sealing gravel packed telescopic screen to casing; AGE-M Packers - replacing the old K-Packer technology; waterwell float shoes; casing grouting valves & float collars. We look forward to applying our expertise on your behalf, whatever your requirements; whether it be simply packer or assisting you with or complete inspection, design & manufacturing service, or anything in between.

 

Alton Drilling, established in 1983 is a privately owned NZ company providing quality professional service with a friendly business approach.

Alton's main drilling focus is exploration, including diamond coring, open hole, mineral exploration, RC and aircore drilling. The company also has worked on various seismic, geotechnical and instrumental jobs.

Alton Drilling also supplies a large range of drilling consumables, parts and equipment as well as manufacturing exploration drilling rigs. The ADL Series rigs are sold all around the world including Australasia, Asia and Europe. The rigs can be mounted on rubber or steel tracks, or built to be heli-portable.

Specialisation, experience and innovation have combined to make Alton Drilling Ltd your Guaranteed Complete Drilling Service Provider.

ASAHI DIAMOND INDUSTRIAL AUSTRALIA PTY LIMITED
81 Bassett Street, Mona Vale, NSW 2103
Phone: 02 9997 7033 Fax: 02 9997 8313
After Hours: 02 9999 1223 Mobile: 0407 266 834
Email: asahi@tpgi.com.au
Website: www.asahi-diamond.com.au
Contact:  Derek Fitton

Branch office
6 Campbell Street, Scarborough, Qld, 4020
Phone: 07 3880 2102  Fax: 07 3880 2102
Mobile 0419 719 610
Email: alljan68@bigpond.com
Contact Allan Harratt

Diamond bit and tool supplier. Our product lines include diamond drilling bits and reamers, wireline and conventional core barrels and drill rods, down hole motors, drilling equipment consumables, Eastman survey cameras.

ASCO HYDRAULIC ACCESSORIES PTY LTD.
5/5 Samantha Court, Knoxfield, Vic, 3180
Phone: 03 9764 0355  Fax: 03 9764 0744
Email: ascohyd@bigpond.com.au
Contact: Steve Peach

Experienced hydraulic design, supply, installation & service since 1977. Quality components, sound, sound advice & prompt delivery. Large stockholding of product & spares. Practical & cost-effective solutions to satisfy your most-demanding hydraulic requirements. Authorised distributor/service centre: Kawaski piston pumps/motors. Danfoss electrohydraulic valves, motors & steering. Asco solenoid & air actuated valves for water & air. Hydraulic pumps, motors, hydrostatic transmissions, cylinders, valves, filters, accumulators, oil coolers, pump splitter drives, reduction gears, winches, cuoplings, rotary unions, radio control instrumentation and more.............

        

ATLAS COPCO COMPRESSORS AUSTRALIA
3 Bessemer Street, Blacktown, NSW 2148
Phone: 02 9621 9600 Fax: 02 9622 3409
Mobile: 0407 912 381
Email:  ausairinfo@atlascopco.com
Website: www.atlascopco.com.au
Contact: David Luke

Branch offices
Adelaide
581 Grand Junction Road, Gepps Cross, SA 5094
Phone: (08) 8360 3666 Fax: (08) 8359 0866

Brisbane
88 Stradbroke Street, Heathwood, QLD 4110
Phone: (07) 3723 6966 Fax: (07) 3278 9954

Kalgoorlie
21-23 Broadwood St, West Kalgoorlie, WA 6430
Phone: (08) 9080 6386 Fax: (08) 9080 6360

Melbourne
Unit 1, 1480-1484 Hume Highway, Campbellfield, VIC 3061
Phone: (03) 9355 5000 Fax: (03) 9355 5050

Newcastle
4 Aminya Place, Cardiff, NSW 2285
Phone: (02) 4922 7300 Fax: (02) 4922 7301

Perth
33 Reid Road, Perth Airport, WA 6105
Phone: (08) 9262 9760 Fax: (08) 9277 1361

Townsville
29 Mather Street, Mt. Louisa, QLD, 4814
Phone: (07) 4758 6300 Fax: (07) 4774 5992

AUSSIE DIAMOND PRODUCTS PTY LTD -
T/As  AUSROC
12 Cooroora Crescent, Lonsdale, SA 5160
Phone: 08 8326 4188 Fax: 08 8326 1822
Mobile: 0419 344 699

After Hours: 0419 344 699
Email: info@ausroc.com
Website: www.ausroc.com
Contact Peter Hanias

Branch Office: 
Vic
Unit 5 37-39 Rushdale Street, Knoxfield, Vic, 3180
Phone: 05 9763 4999  Fax: 03 9763 4900
Mobile- Ah.  0419 207 387
Email: info@ausroc.com.au
WA
5 Keats Road, Armadade, WA 6112
Phone 08 9498 3322  Fax: 08 9498 3355
Mobile-Ah. 0438 943 990
Email: adamsond@bigpond.com.au
Contact: Darrell Adamson

Manufacturers and suppliers of:

- Tungsten button grinding machines, hand held grinder, diamond burrs for DTH hammer, diamond core exploration bits.

- Diamond core bits & reamers

- Edson range of drill rigs for geotechnical, environmental, down the hole hammer, diamond core exploration drilling.

- Range of drill rig hydraulic rod clamps

- Edson range of vacuum drill rigs, vacuum drilling systems and down the hole consumables.

- Model 1500-1600 pump spares, bean pump spares.

- Auger drill systems, gemco and edson solid and hollow auger and auger drill bits.

- Geotechnical drill consumables ie W series & tapered drill rods, split barrel, thin wall samplers, drop hammer assemblies.

- Diamond drilling, DTH hammer and rotary drilling, drill rods, casing, core barrels, hoisting plugs, water swivels, subs and core trays.

- Goldfields range pnuematic tools, rods, moils & chisels.

- Under road boring rod, drill bits & consumables.

- Drilling muds & Fluids

- Agents for 2IC ezy mark core orientation systems.

AUST-AIR COMPRESSORS PTY LTD
2/9 Neumann Road, Capalaba, QLD 4157
Contact: John Austin
Phone: (07) 3390 1144
Mobile: 0402 884 189
Email: sales.aust-air@bigpond.com

Aust-Air Compressors is a specialist manufacturer and importer of a full range of high pressure booster compressors for drilling and mining applications. Booster volumes range from 900 – 5,000 cfm inlet capacity with discharge pressure ranging from 600 through to 2,000 psig.

Aust-Air can offer a complete line-up of standard booster packages or can design and engineer a package to suit specific applications. Units are available as skid mount, trailer mounted and fully enclosed silenced packages.

We are able to offer full re-build capabilities, sales, service and hire, as well a supply of spare parts to suit a full range of booster packages.

AUSTRALIAN DRILLING SPECIALTIES PTY LTD
6 Rollings Crescent, Kwinana, Perth WA, 6167
Phone: 08 9419 1797  Fax: 08 9439 1373
After Hours: 08 9386 5284  Mobile: 0417 911 497
Email: knox@iinet.net.au
Contact: John Knox

Manufacturer of Biodegradable Lubricants, Polymers, and Drilling Trench products
 

AUSTRALASIAN MINING SERVICES PTY LTD (AMS)  
270 Berkshire Road, Forrestfield, WA 6058
P.O. Box 2380, Midland, WA 6936
Phone: 08 9454 3444 Fax: 08 9454 3400
Mobile: 0418 521 339
Email: inquiries@austms.com
Website: www.austms.com
Contact: Andrew Andreou

WA BRANCH
25 Pirie St, Boulder, Kalgoorlie, WA 6432
Phone: 08 9093 3966 Fax: 08 9093 3988
Mobile: 0448 876 697
Email: inquiries@austms.com
Contact: Craig Bereth

NSW BRANCH
32 Enterprise Crescent, Singleton, NSW 2330
Fax: 02 6571 3188
Mobile: 0418 521 339
Contact: Steve Wales

Specialist Sectors: Water well, Diamond Coring, HDD, Blast hole, Geotechnical

Australasian Mining Services Pty Ltd also better known as AMS

AMS is a privately owned Australian Company formed in 2001 to service the Mineral Exploration, Mining, Water well and Geotechnical sectors of the Drilling Industry.

AMS head office is located in Forrestfield, Perth Western Australia with branches in Kalgoorlie Western Australia and Singleton New South Wales.

AMS has establised a reputation for outstanding commitment to product quality, innovation, pricing and most importantly customer service.

We provide the highest quality products and services to the mining industry.

Our products and services include:

A comprehensive range of Diaamond drilling products

HAYDEN (Canada) Diamond bits & accessories

Core barrels assemblies and core barrel parts & accessories to suit

Diamond drill rods & Casing

Kempe Diamond drills and spare parts

Core trays - Explorer plastic and zincalume trays, both domestic and export series

Drilling Fluids

Drag bits

Adaptor subs to suit various Industry threads

Percussion rock drilling tools: for surface and underground appplication

Down th hole hammners (DTH) and bits: for production and water well drilling applications

Rotary drill (blast hole) tri cones drilling products

Water well tri cones (sealed bearing) drilling products

Rotary drill Pipe, subs, deck bushings

Supply and service of Industrial Scientific M40 gas detection units for underground mining applications

Technical support
We also provide technical on site support for diamond and blast hole drilling operations as well as servicing and breaking out of all makes of DTH hammers in our workshop facility based in Perth.

AUSTRALIAN DRILLING  TECHNOLOGIES
9 Rollins Crescent, Kwinana, WA 667
Phone: 08 9419 1797  Fax: 08 9430 1373
After hours: 08 9386 5284  Mobile: 0417 911 497
Email knox@iinet.net.au
Contact: John Knox

AUSTRALIAN MUD COMPANY LTD
5 Pitino Court, Osborne Park, WA 6017
Phone: +61 8 8 9445 4000 Fax: +61 8 9445 4040
Email: craig.weston@imdexlimited.com
Website: www.ausmud.com
Contact: Craig Weston
Mobile: 0419 942 091

The Australian Mud Company (AMC) provides an extensive range of quality drilling fluids and on site support to the minerals oil and gas, waterwell, horizontal directional drilling and tunnelling industries worldwide.

AMC was the first Australian drilling fluid company to achieve Quality Assurance certification; and maintains a philosophy of continual development of innovative and environmentally friendly products.

 

B

 

BAROID INDUSTRIAL DRILLING PRODUCTS
53-55 Bannister Road, Canning Vale, WA 6155

Customer Service:
Office: (07) 3811 6008
Fax: (07) 3811 6099

Phone: 08 9455 8300
Fax: 08 9455 5300

Mobile: 0417099354
Website: www.baroididp.com
Contact: Mark Taylor 

Branch Offices

NSW
49 Station Road, Otford, NSW 2508
Phone: 02 4294 9171 Fax: 02 4294 9172
Mobile: 0414 557 917
Email: robert.petrie@halliburton.com
Contact: Robert Petrie

QLD
16 Spesser St, Tivoli, QLD 4305
Contact: Mike Skull
Phone: (07) 3812 8730
Mobile: 0458 458 152
Email: michael.skull@halliburton.com

 

Bariod Industrial Drilling Products supplies a comprehensive line of drilling fluid additives, bentonite viscosifiers and grouts, well remeditation and development products engineered to optimize performance and lower-end user costs. Baroid IDP utilizes a worldwide distributor network to provide products and service to the industrial drilling industry; including mineral exploration, water well, HDD, drilled shaft, slurry wall, micro-tunneling, pipe jacking, tunneling, geothermal, geotechnical, environmental and construction applications. Fluid testing equipment is available through FANN Instrument Company at www.fann.com. The IDP network of sales and service representatives provides job-site expertise and customer training workshops in the classroom and in the field. Bariod IDP is a product Service Line of Halliburton.

BASKI INC
1586 South Robb Way, Denver, Colorado, 80232 USA
Phone: 303 789 1200  Fax: 303 789 0900
Mobile: 303 748 2767
Email: Info@baski.com

Website: www.baski.com

Contact: Hank Baski

Baski Inc. manufacturers standard and custom-built infaltable packers and hydrofracture packers for all applications. These packers can withstand pressures up to 700 bar (10,000 psi) and are available for 38mm to 1,500mm (1-1/2" to 60") holes.

Downhole ASR (aquifier storage and recovery) Valves are available for 50mm to 300mm (2" to 12") and larger column pipes. Baski's patented ASR valves provide reliable, cavitation free, and sand-resistant performance.

Pitless Units, Cutthroat flumes and other products for investigating, controlling and producing the earth's fluids are also manufactured at this Denver, CO based company.
 

JOHN BEAN TECHNOLOGIES AUSTRALIA LTD
(formerly FMC TECHNOLOGIES)
Cnr. Marple Avenue & Biloela Streets, Villawood NSW 2163
Phone: 02 9723 2000, Fax: 02 9723 2085

Mobile: 0418 110 445
Email: victor.rokhlin@jbtc.com
Website: www.jbtcorporation.com
Contact: Victor Rokhlin
 

FMC fluid control, plunger and piston pumps are used in a countless number of applications across a wide range of industries including oil and gas, mining and drilling, reverse osmosis, sewer cleaning, agriculture and general industry. The durability of FMC "Bean" piston pumps is unsurpassed within the vertical drilling markets and has led FMC Technologies pumps to become the leader within the surface and underground coring, water well, geotechnical and environmental drilling markets.
John Bean Technologies (formerly FMC Technologies Australia) holds stock of FMC pumps, relief valves and spare parts. We can also offer pump skids built to customer requirements.


 

BEDROCK DRILLING SUPPLIES
1/9 Neumann Road, Capalaba, QLD 4157
Contact: Shane Austin
Phone: (07) 3390 2111 Fax: (07) 3390 2511
Mobile: 0403 296 612
Email: sales@bedrockdrill.com
Website: www.bedrockdrill.com

Branch offices:
New South Wales
314 Cedar Party Road, Taree, NSW 2430
Contact: Leon Hook
Phone: (02) 6551 0774
Fax: (02) 6551 0742
Mobile: 0409 510 744
Email: leon@bedrockdrill.com

Malaysia
Bedrock Drilling Supplies (M) Sdn. Bhd., Selangor D.E., MALAYSIA
Contact: Keith Wallace
Phone: +60 332906905 Fax: +60 332906906
Email: keith@bedrockdrill.com

Bedrock Drilling Supplies manufactures and supplies a comprehensive range of products to the Australian and international drilling and mining industries.

Products include:
• Hydraulic top head drive drilling rigs for geotechnical, water well and exploration.
• Heli-portable drill rigs and compressors
• BDS single and two speed rotary heads
• BDS “Big Foot” foot clamps
• High pressure drill compressors
• Top drill DTH hammer and bits
• PCD, blade and rotary drill bits
• Drill rods, conventional, RC, coring
• Diamond core drilling products
• Mud pumps and water injection pumps
• Spare parts and accessories

Bedrock Drilling Supplies has full in-house design, engineering and manufacturing capabilities as well as representing a number of high quality manufacturers in the market.

 


BOART LONGYEAR AUSTRALIA PTY LTD

Regional Office and Manufacturing Facility
919-929 Marion Road, Mitchell Park, South Australia 5043
Ph: 08 8375 8375 | Fax: 08 8377 0534
Email: info_aus@boartlongyear.com
Website: www.boartlongyear.com

Contacts: Ross Tilson, Sales & Marketing Director – Asia Pacific
Ray Bryant, Sales Manager Products – Australia Pacific

Boart Longyear Ltd (ASX: BLY) is the world’s leading integrated drilling services provider and products manufacturer for the Minerals Industry, with a substantial presence in the Environmental & Infrastructure and Energy Industries.

The company has a corporate office in Adelaide, Australia and its operational head office is in Salt Lake City, Utah, United States. It has five regional offices located in Australia, Canada, The Netherlands, Peru and South Africa. Boart Longyear has more than 9,000 employees and provides contract drilling services in 30 countries and distributes products to customers in more than 100 countries.

The group’s global business centres on providing customers with a unique range of industrial diamond and tungsten carbide products, systems and services applied across four areas:
• Contract Drilling Services across all facets of drilling
• Exploration Tools and Equipment
• Rock Drilling Tools and Equipment
• Geotechnical and Environmental Tools and Equipment

Products & Equipment branch offices:

AUSTRALIA

QUEENSLAND
Unit 10/16 Metroplex Avenue
MURARRIE QLD 4172
Tel 07 3899 7419 Fax: (07) 3899 7499

Contact: Harry Mostert
Email: hmostert@boartlongyear.com

SOUTH AUSTRALIA
919-929 Marion Road
MITCHELL PARK SA 5043
Tel 08 8375 8375 Fax: (08) 8377 0539

Contact: Paul Brown
Email: pbrown@boartlongyear.com

WESTERN AUSTRALIA
170 Kewdale Road
KEWDALE WA 6105
Tel 08 9352 9600 Fax: (08) 9352 9601

Contact: Anton Clarkson
Email: aclarkson@boartlongyear.com

20 Percy Road
WEST KALGOORLIE WA 6430
Tel 08 9021 2966 Fax: (08) 9021 8857

Richard Epstein
Area Sales Manager – Goldfields
Email: repstein@boartlongyear.com

ASIA PACIFIC

Hong Kong & China
Unit 8, Level 23, One Island East
18 Westlands Road, Island East

HONG KONG
Contact: Calvin Lim
Phone: +86 138 1888 9928
Email: calvin.lim@boartlongyear.com

China
Room 301, Unit 2, Building 105, Wanke Qingqing Jiayuan, Dougezhuang
Chaoyang District, Beijing 100023
PR CHINA

Contact: Linfei Wang
Phone: +861 360 117 7454
Email: lwang@boartlongyear.com

SINGAPORE
896 Dunearn Road
#04-03A Sime Darby Centre
SINGAPORE 589472

Anton Clarkson, Area Sales Manager – NE Asia
Tel +65 9758 1942
Email: aclarkson@boartlongyear.com

Contact: Max Ng
Tel +65 9696 5112
Email: mng@boartlongyear.com

BORES NT P/L
1682 Monck Road, Acacia Hills, NT 0822
Phone: 08 8988 8068 Fax: 08 8988 8038
Mobile: 0411 631 195
Email: waterbores@bigpond.com.au
Contact: Henry

                
BOURNEDRILL PTY LTD
133 Beatty Road, Archerfield, Qld 4108
Phone: 07 3275 1311 Fax: 07 3277 5924
Website: www.bournedrill.com.au
Email: info@bournedrill.com.au
Contact: Graham Bourne/George Bourne

Specialist sectors: Waterwell, Blasthole, Mineral Exploration, Oil/Gas, Seismic, Geotechnical, Foundation, Marine, Site Investigation.
Quality systems to ISO 9001

Bournedrill Pty Ltd, specialises in the manufacture of a wide range of drilling equipment from its premises at Archerfield, Brisbane, including drill rigs and components. The extensive range of machines includes top head drives, Rotary table, bucket drill and cable tool rigs.
Mud Pumps: New and factory reconditioned
Consumables: Drill pipe, casing, drill collars, stablisers, hole openers and crossovers.
Drill: bits Blade Type chevron and step type 2 15/16" to 17 1/4" in diameter
Blowout preventers and accumulators for methane gas drainage.
Supply of new units and consumables.
Bournedrill also provides specialised machining services, which include large capacity turning, boring and milling.

BW SOLAR
84 Valcan Road, Orange Grove, WA 6109
Phone: 08 9359 4048 Fax: 08 9359 3530
Mobile: 0429 919 865
Email: skiparinga@bigpond.com
Website: www.bwsolar.com.au
Contact Geoff Ingleton
 
Please note we have changed business - formerly Wheatbelt Water Drilling - now BW Solar.
Supplies of Helica Rotor and centrifical Solar Water Pumps.
Suitable for mining, farms and pastural stations.

C

CAMTEQ INSTRUMENTS
10 Reservoir Road, Orange Grove, WA 6109
Phone: 08 9493 6992 Fax: 08 9493 6998
Mobile: 0439 525 151 / 0428 944 839
Email: john@camteq.com.au        nick@camteq.com.au
Website: www.camteq.com.au  
Contacts: John Penrose, Nick Kleyn

Camera sales, hire & repairs

Flexit, Camteq Pro Shot & Maxibor

Wireline Winches

Electronic Orientation Tool

Downhole Motors

Camera consumables & Running Gear

Orientation equipment

CARBIDE BIT CO
664 Boundary Rd, Richlands, Brisbane, Qld 4077
Phone: 07 3375 1167 Fax: 07 3375 4958
Mobile: 0418 715 998
Email: tricone@bigpond.com.au
Website: www.tricone.com.au
Contact: Dan O'Keefe

The Carbide Bit Co has large stocks of Tricones and P.D.C. Bits, possibly the largest stockist in the Southern Hemisphere, also supplying Tungsten Core Bits, Reamers, Casing shoes, Hole openers, Tricone, Blade, or P.D.C Multi wing types, incorporating non return valves for the Artesian Water Well, Mineral exploration, Blasthole, Directional drilling, and Site Investigation. Exclusive Distributors for Australia and New Zealand for Kay Rock Bit Co of USA, The Kay Rock range included Heavy Duty Carbide Drag Bits suitable for Blasthole. Waterwell and Mineral Exploration. 

 
            

CAT® RENTAL POWER - ENERGY POWER SYSTEMS AUSTRALIA PTY LTD
47-51 Westpool Drive, Hallam, Vic 3803
Phone: 03 9703 4000 Fax: 03 9703 4004
Website: www.catrentalpower.com.au

BRANCH LOCATIONS:

New South Wales - Sydney
1 Holmes Road, Minto, NSW 2566
Phone: 02 8796 9200
Fax: 02 8796 9299
Contact: Tom McDonald +614 1875 9861
Email: tom.mcdonald@energypower.com.au
Contact: Kerry Reardon +614 2851 8752
Email: kerry.reardon@energypower.com.au

South Australia - Adelaide
19 Taminga Street, Regency Park, SA 5010
PO Box 2340, Regency Park SA 5942
Phone: 08 8244 0088
Fax: 08 8244 0545
Contact: Marcel Heijkoop +614 0010 0257
Email: marcel.heijkoop@energypower.com.au

Victoria – Melbourne
32-42 Spencer Street, Sunshine, VIC 3020
Phone: 03 9314 1692
Fax: 03 9314 4863
Contact: Dave Davies +614 0817 8499
Email: dave.davies@energypower.com.au
Contact: Simon Buckley +614 3858 5590
Email: simon.buckley@energypower.com.au

Queensland – Brisbane
46 Colebard Street East, Acacia Ridge, QLD 4110
Phone: 07 3722 1400
Fax: 07 3276 8442
Contact: Adam Homewood +614 1735 7435
Email: adam.homewood@energypower.com.au
Contact: Andrew Mura +614 0011 5726
Email: andrew.mura@energypower.com.au

Queensland - Townsville
12 Reward Court, Bohle, QLD 4818
Phone: 07 4774 6244
Fax: 07 4774 6954
Contact: Kurt Lewis +614 0099 7984
Email: kurt.lewis@energypower.com.au

Queensland - Rockhampton
Port Curtis Road, Rockhampton, QLD 4700
Phone: 07 4927 8432
Fax: 07 4927 8476
Contact: Shaun O’Brien +614 8846 0304
Email: shaun.obrien@energypower.com.au

Western Australia - Perth
222 Welshpool Road, Welshpool, WA 6106
Phone: 08 9442 8566
Fax: 08 9442 8523
Contact: Peter Halliday +614 7357 7139
Email: peter.halliday@energypower.com.au
Contact: Vikki Williamson +614 0012 1621
Email: vikki.williamson@energypower.com.au

Northern Territory - Darwin
10 Callanan Road, Yarrawonga, NT 0830
Phone: 08 8931 2435
Fax: 08 8932 8295
Contact: Phil Brushett +614 2931 1637
Email: phil.brushett@energypower.com.au

CAT Rental Power is a division of Energy Power Systems Australia Pty Ltd, specialising in Energy Rental Solutions; Compressed Air, (including High Pressure and 100% Oil Free units), Power Generation and Temperature Control equipment under the global Caterpillar® brand CAT Rental Power. Our solutions and service support are available 24 hours a day, 7 days a week, 365 days a year. For as short as 1 day or, for as long as you need, we provide complete, professional solutions to enable your continued production. Energy Power Systems Australia are the exclusive CAT Rental Power dealer in Australia, Papua New Guinea and, Solomon Islands.

 


CHAMPION COMPRESSORS PTY LTD
11-15 Marlo Place, Hallam, Vic 3803
Phone: 03 9703 8000 Fax: 03 9703 8053
Email: itessmann@sullair.com.au
Website: www.sullair.com.au
Contact: Ian Tessman.
Mobile: 0419 728 188

Branch offices
Western Australia
46 Sorbonne Crescent, Canning Vale, WA 6155
Phone: 08 9455 9603
Email: tgodwin@sullair.com.au
Contact: Tom Godwin.
Mobile: 0409 526 321

South Queensland (Brisbane)
Lot 5, Wirraway Place, Archerfield, Qld 4108
Phone: 07 3277 3518
Email: gbrown@sullair.com.au
Contact: Geoff Brown.
Mobile: 0419 735 188

North Queensland (Mackay)
15 Central Park Drive, Paget, Mackay 4740
Phone: 07 4944 5904
Email: mchedgey@sullair.com.au
Contact: Mark Chedgey.
Mobile: 0407 515 587

New South Wales
21 Garner Place, Ingleburn, NSW 2565
Phone: 02 9618 4267
Email: dzec@sullair.com.au
Contact: Daniel Zec.
Mobile: 0418 319 918

South Australia
178 Cormack Road, Winfield, SA 5013
Phone: 08 8444 4600
Email: kanderson@sullair.com.au
Contact: Kym Anderson.
Mobile: 0407 608 088

Victoria
Unit 2, 5 Becon Court, Hallam, Vic 3803
Phone: 03 8786 0600
Email: ddavis@champcom.com.au
Contact: Daryl Davis
Mobile: 0448 591 611

Sullair Australia is no stranger to the compressed air market, having established a strong presence in the mining, exploration drilling and general manufacturing sectors over the past three decades. Servicing the domestic market, Sullair Australia joins the company’s US, China and France operations to provide a truly international compressed air solution for its customers. An ISO9001/2000 company, Sullair Australia is an active member of the Australian Drilling Industry Association (DIA) remaining consistently in touch with industry to ensure it meets the most demanding of applications.

CHEMDREX CHEMICALS
3 Supply Court, Albion Park, NSW 2527
PO Box 326, Albion Park, NSW 2527
Phone: 02 4256 6569 Fax: 02 4256 3593
After hours:: 02 4257 2398 Mobile: 0419 243 637
Email: gmonkman@chemdrex.com.au
             gmonkman@bigpond.net.au
Website: www.chemdrex.com.au
Contact: Gordon Monkman

Manufacturer and consulting, waterbore rehabilitation/development chemicals. Chemdrex Chemicals locally manufactures EDCA, ALBA, ASCA-200, ADPA, BMR, and ALBA PLUS, the complete range of water bore rehabilitation chemicals for the removal and control of iron bacteria, iron oxide, bio-films and mineral scales.

Also water bore development chemical additives for the development and removal of physical plugging materials in water bore aquifers. Agents for Australian-made Wedge Tech stainless steel screens and other drilling fluid products. Services include consultative and water bore design based on over 50 years’ experience in the design, construction and maintenance of water bores.

CLEARBORE PTY LTD.
Unit 11/26 Terrace Rd (PO Box 347), North Richmond, NSW 2754
Phone:  1800 013 210 Fax: 02 4571 3041
Mobile: 0427 235 144
Email sales@clearbore.com.au
Website: www.clearbore.com.au
Contact: John Stokes

Branch office: New Zealand
Phone 0800 443 537    Fax: 0800 443 538

The company manufactures and distributes products directed towards the groundwater extraction industry in general. Clearbore is designed to remove the iron biofilm and hard encrustations that can block a groundwater pumping system. Clearbore can also be used in the field or workshop to clean inoperable pumps and other irrigation equipment. Clearbore is available in three sizes: 5kg, 10kg and 20kg plastic pails. The company also manufactures two iron stain removal products: X-Fe and X-Fe Forte. They are ideal for removing red stains caused by groundwater. All Clearbore Pty. Ltd. products are safe, simple to use, completely biodegradable and rated non-dangerous according to the ADG Code.

CONDAMINE WELLSCREENS PTY LTD

62 Industrial Avenue, Toowoomba, QLD 4350

Phone: 07 4634 5311  Fax 07 4634 5344

Mobile: 0418 647 797

Email: cws@wedge-wire.com

Website: www.wedge-wire.com

Contact: Phill Costello

Australian owned and operated manufacturer of quality stainless steel wedge wire products, bore hole screens, also fittings, suction filters, sieves, flat panels and grates; and other wedge wire products. Products supplied both domestically and internationally.

CONQUIP PACIFIC P/L

40 Blanck Street, Ormeau, Qld 4208

Phone: 07 5540 6999  Fax: 07 5540 6997

Mobile: 0420 997 984

Email: mattg@conquippacific.com.au

Website: www.furukawa.com.au

Contact: Matt Golby

 

Dealership - Eagle Equipment Australia Pty Ltd

 

National Distributor for "Furukawa" Rock Drilling Equipment

 

CONTROL CHEMICAL (1989) CORP

7016 - 30 Street S.E. , Calgary, Alberta, Canada TZC1N9

Phone: 403 720-7044  Fax: 403 720-4951

Email: info@controlchemical.com

Website: www.matex-ccc.com

Contact: Bob Coak

Manufacturer of vegetable oil based drilling lubricants such as rock drill lubricants, torgue reducer, and thread compound. Specializing in simplified drilling fluid systems for diamond drilling, HDD, and stabilization of surface and underground blastholes.

CORETELL PTY LTD
10 Reservoir Road, Orange Grove, WA
Contact: John Penrose
Phone: (08) 9493 6994 Fax: (08) 9493 6998
Mobile: 0439 525 151
Email: john@camteq.com.au
Website: www.coretell.com.au

Coretell is an Australian company that supplies mechanical and electronic orientation equipment for core and hole orientation.

CRUSADER HOSE PTY LTD
22 Industry Place, Bayswater, Vic 3153
Phone: 03 9720 1100 Mobile: 0408 744 009
Email: sales@crusaderhose.com.au
Website: www.crusaderhose.com.au
Contact: Francois Steverlynck

Crusader Hose manufactures Flexible bore hose for the waterwell sector. It is used with submersible pumps for bore water pumping. There are many advantages of using flexible bore hose compared to poly or steel risers. These include ease of application, corrosion resistance and excellent hydraulic performance
All hoses are manufactured in our Melbourne factory which is ISO 9001 accredited.

D


D&B SUPPLIES
12 Dwyer Street, Boulder, WA 6432
Phone: 08 9093 2820 Fax: 08 9093 2821
Mobile: 0407 990 291
Email: dbsupplies@bigpond.com
Contact: Phillip Usher

Branch office:
Unit 1/23 McDonald Crescent, Bassendean, WA 6054
Phone: 08 9379 0111 Fax: 08 9379 0222
Mobile: 0407 914 663
Contact: Peter Usher
Email: peter@dbsupplies.com.au

Agents for: Boart Longyear diamond drilling equipment,

Ezy-Mark orientation kits, Ezy-Grease downhole greasing kits,

FMC pumps and spare parts, Mincon Rockdrills and downhole hammers, Ridgid tools, Baroid muds and Jet-Lube greases.

DAVIES INTERNATIONAL
624 Bickley Road, Maddington, WA 6109
Phone: 08 9452 1066 Fax: 08 9459 8870
Mobile: 0418 917 020
Email: davint@iinet.net.au
Website: www.daviesinternational.com.au
Contact: Leigh Davies

Type of operations: Auger, Coring, Mud Rotary, RAB, RC, DHH

• Manufacturers and agents for drilling rigs and commercial equipment.
• Specialising in the worldwide sale of drilling rigs and equipment.
• Insurance valuations and assessments.
• More than 30 years’ industry-related experience

DEECO SERVICES LTD
21 Regent Street, Petone 5012, NZ
PO Box 33-226, Petone 5012, NZ
Phone: 04 568 5293   Fax: 04 568 5273
Mobile: 027 4480 890
Email:  marcus@deeco.co.nz
Contact Marcus Durrant

Johnson Screens, stainless steel continuous slot vee wire, waterwell screens, Invensys bulk water meters, Arkal disc filtration systems, Bermad hydraulic control valves, Wilkins backflow prevention and Vent O Mat "Anti surge" air and vacuum valves. The largest range of stainless steel waterwell screen stocked in New Zealand.

 

DEPS PTY LTD
15 Embry Court, Pakenham, Vic 3810
Phone: 03 5941 2600 Fax: 03 5941 4148

Email: inquiries@deps.com.au
Website: www.deps.com.au
Contact: Steve Neilson

DEPS delivers world class, affordable piping solutions on time and every time guaranteed. We cater for the drilling, environmental. irrigation, mining, civil and plumbing markets.

You know when you’re in charge of a project that is on a strict time frame and tight budget then all of a sudden you have that sickening feeling when realising that somehow a crucial piping component that they never told you about is not there as needed or it doesn’t fit.

Well, what we do is solve this problem for you by manufacturing and arranging the delivery of your piping component on time so you can meet your project deadline without any further delays so you get paid on time.

We have our iron clad “No Hole Guarantee”: if the product is not delivered on time then we will pay our customer $200 per day until it arrives.

 

DIADRILL MINING SUPPLIES

16 Vivian Street, Boulder, WA, 6432

Phone: 08 909 3677  Fax: 08 9093 3688

After Hours: 0409 203 348

Mobile: 0417 914 788 or  0400 227 956

Email: sales@diadrill.com.au

Website: www.diadrill.com.au

Contact: Ron Kenendy/Mike Huxtable

Diadrill features include:Australian distributor for Fraste drilling rigs:air core systems:sample swivels:blowback subs:Diaspan breakout wrenches:RC rods:diamond drilling consumables:replacement parts for underground rock drills:metal spraying of seal areas on spindels & swivels:manufacture and refurbish of all types of drifter & drilling machine cradles:manufacture & refurbish all types of hydraulic cylinders:inlet swivels:blow down subs:rotation heads for both rc & air core:drag bits:make-breakout tools:replacement parts for blasthole rigs:general & specialised machining.

DIAMOND ABRASIVES AUSTRALASIA
Suite 105, 125 Swanston Street, Melbourne, Vic, 3000
Phone: 03 9663 4468  Fax: 03 9663 4474
Email: diamondabrasives@bigpond.com
Contact: Kyra Strangwick

Diamond Abrasives Australasia is the Independent sole distributor in Australia and New Zealand for the product range of Element6 Ltd.
We offer the full range of products for the mining and construction industrial diamond tool manufacturing industries, including industrial diamond grit, polycrystalline and cubic boron nitride blanks, Monodie and CVD material.

DIAMOND INDUSTRIAL TOOLS (WA) P/L

119 Dowd Street, Welshpool, WA 6106

Phone:08 9353 1288 Fax: 08 9451 7779

Mobile: 0417 911 158

Email: brian@dit.net.au

Web: www.dit.net.au

Contact: Brian Andrews

A complete range of drilling equipment for environmental, waterwell, mineral, geotechnical and production drilling. Products include baroid drilling fluids, bournedrill drag bits, ridgid wrenches, PVC casing and screens, gravel pack, sample splitters, core trays, diamond drilling and percussion drilling equipment, replaceable blades and button grinding equipment.

DONGARA DRILLING & ELECTRICAL
Lot 14 Brand Highway (PO Box198) Dongara WA 6525
Phone: 08 9927 1215, Fax: 08 9927 2515
After Hours 08 9927 2020, Mobile: 0427 931 058
Email: cumber@midwest.com.au
Website: www.dongaradrillingandelectrical.com.au
Contact: Hugh Campbell

Manufacture Generator Skid Units up to 100ka
Pump skids for electrical and Diesel driven units.
Yanmar engine agents
Remote control units made to order

DOWNHOLE SURVEYS
Unit 1/7 Lloyd Street, Midland, WA 6056
Phone: (08) 9250 1827 Fax: (08) 9274 8189
Mobile: 0427 880 425
Email: gyro@downhole.com.au
Website: www.downhole.com.au
Contact: Ben L’heureux

Branch offices:
Kalgoorlie
201 Broadwood Street, Kalgoorlie, WA 6430
Phone: (08) 9021 8015 Fax: (08) 9021 2012
Email: info@downhole.com.au

Orange
PO Box 2568, NSW 2800
Phone: 0429 452 317 Fax: (08) 9438 3033
Email: info@downhole.com.au

Downhole Surveys specialises in downhole surveying services, sale and rental of Flexit surveying tools for the minerals exploration sector. Our new Flexit GyroSmart allows us to survey inside drill rods and magnetic ground. With the smallest and simplest technology, unlike other Gyro systems, GyroSmart requires no warm-up time or surface callibration other than a three minute roll check.

Downhole Surveys also offers a complete range of portable wireline Smart Winches that can survey very deep holes. DHS is the official FLEXIT Help Centre in Australasia for the new Gyrosmart and the popular MultiSmart Surveying Instruments. We manufacture a full range of quality running gear to suit most electronic survey tools: 36+38mm brass barrels, aluminium rods and landing collars etc.

DHS is offering both rental and purchase packages for all survey equipment and winches. Ask for a GyroSmart technical DVD with the DHS experts.

 

DPSA DRILLING EQUIPMENT
679 Boundary Road, Darra, QLD 4076

Phone: 07 3456 4600 Fax: 07 3456 4698

Email: kena@dpsagroup.com

Website: www.dpsadrilling.com

Contact: Ken Aldridge (Technical Sales)

Mobile: 0458 225 235  

• Australian Made Drill Rigs
• Geo, Waterwell, Exploration and CBM
• Single and Two Stage Compressors
• Rig Component Kits - Compressor Build Kits
• JOYTECH DTH and JQ Hammers 2" to 60"
• Mission Hammers
• DTH Bits,Hole Opener Pilot Bits, Mission Bits, Shock Absorbers
• Advanced Casing Systems
•   Drilled Foundation Equipment
• Multi - Hammers, Cluster Hammers
• Shrouded Hammers
• PDC, Blade, Diamond Coring Supplies, Tricone Bits
• Large Diameter PDC and Tricone for Oil and Gas Drilling
• Drilling Fluid and Mud Supplies
• Small to Large turn key Mud Pumps
• Wireline Core Barrels, Overshot Assemblies and Conventional
  including HMLC and NMLC
• Wireline and Conventional Drill Rods and Casings
• RC Drill Rods
• Water Swivels, Recovery Tools, Hoisting Plugs

DRILLMASTER INTERNATIONAL                  
1300 Heritage Parkway, Mansfield, Texas 76063, USA   
Phone: 817- 453 2600 Fax 817- 277 0068        
Email: drillmastersales@sandvik.com
Website: www.sandvik.com               
Contact: David R Griffin
 

Since 1986, Drillmaster Intl. has been manufacturing world-class quality DTH tools for the water well, mining, construction, and oil & gas drilling industries. Our product line include standard and custom designed Hammer Bits, (Sizes 2 3/4" - 42") for all industry hammer shanks, Percussion Hammer  (Sizes 2" - 30"). standard and custom designed Hole Openers, Casing Crown Bits, in many sizes and thread types, Threaded Percussion Bits (Sizes 2' - 6 1/4") available in T-38, and T-45 and T-51 models, Drilldex Overburden Drilling Systems in standard and custom sizes, and other custom designed Drilling Tools as required, Fast delivery, competitive pricing, complete industry product warranties and "Genuine customer service" care drives our products.

 

DRILLMAX PTY LTD
PO Box 1014, Campbelltown, SA 5074
Phone: 08 8165 2535 Fax: 08 8262 2137
Mobile: 0408 080 745
Email: drillmaxaustralia@hotmail.com
Contact: Carlo Frangiosia
 

Specialist sectors: Waterwell, Geotechnical, Environmental, Foundation Drilling, Earthmoving
Quality Accredited.

DRILL RIG ENGINEERING AND MAINTENANCE SERVICES PTY LTD
4 Marsh Street, Coffs Harbour, NSW
Phone/Fax: 1300 881 345
Mobile: 0408 634 411
Email: kridout@bigpond.net.au
Contact: Ken Ridout

Specialist supplier of Hydraulic, Mechanical. Pneumatic & Engineering Services to all drilling sectors, both Australia wide and Overseas
Specifically Drill and Compressor repairs & servicing in the field.
 

 

THE DRILL SHOP
48 Winton Road, Joondalup, WA 6027
Phone: 08 9400 7703   Fax: 08 9300 9568
Mobile: 0419 504 131
Email: dwaynereynold@thedrillshop.com.au
Website: www.thedrillshop.com.au
Contact: Dwayne Reynolds

The Drillshop specialises in the supply of high quality mining and drilling equipment to the Exploration Industry. We are the exclusive Australian distributor of the Dimatec range of diamond drilling tools; and we are also the official distributor for the Camteq Instruments range of surveying equipment, the Spillstation range of environmental products and the Baroid range of drilling fluids.

We also supply our own range of high quality core barrel equipment manufactured to meet our stringent quality demands and also source supply and provide logistical assistance for a comprehensive range of other associated drilling equipment.

The Drillshop provides comprehensive, ongoing technical support and is proud of its reputation for honesty and integrity.
 

DRILLSTAR ENG.
11 Rowe Street, Malaga, WA 6090

Contact: Henk or Richard
Phone: 08 9249 9039   Fax: 08 9249 9038
Email: henk@drillstar.com.au or richard@drillstar.com.au

DrillStar Eng. specialises in the manufacturing of RC—Blasthole—Waterwell.---AP1 and directional drilling equipment
A full range of tooling Is available including Drillrods, Stabilisers, Drillcollars, Conversion Subs, Swivels,
Rotary Heads, RC Top Deviators’ Aircore Bits, Drag Bits, Sample and High pressure hose fittings to our compatible priced range RC DriIl rods, many of these are ex stock.
Our personalised services include, trouble shooting, custom designed drilling packages and innovative drilling equipment backed up by 20 years of experience.
We added our premium Drillpipe range with extra hardened Tool joints, hardened Inner tube ends and a new sealing system eliminating O-rings.
 

DRILL TECHNICS AUSTRALIA PTY LTD

Battles Industrial Area, Malanda, Qld 4885

Phone:07 4095 1199 Fax: 07 4095 1355

After hours: 07 4095 1334

Email: mikepulman@drilltechnics.com.au

Web: www.drilltechnics.com.au

Contact: Mike Pulman

Drill Technics continues to provide custom built, client required drilling rigs - manufactured in Malanda, FNQ. These include man portables, vehicle mounted, track mounted, even tructor mounted rigs, along with fluid pumps, hydraulics and associated equipment. It supports its own specialised 4x4 tructor mounted drill rig which is a go anywhere, multipurpose machine, great for first pass exploration and water bores, aircore and RC. Our 26th rig has successfully been completed by our small, 6 person team. We pride ourselves in a well engineered reasonable priced product which Mike the boss, designer and tradesman oversees to the last details and decal.

                

DTH PRODUCTS PTY LTD
14/60 Coulson Street, Wacol, Qld 4076
PO Box 226, Carole Park, QLD 4300
Phone: 07 3879 3744 Fax: 07 3879 3721
Call: 1300 374 554
Email: sales@dthproducts.com
Website: www.dthproducts.com
Contact: Trevor James/Keith Carvolth/Gillian Hurst

Branch offices:

Mount Isa
13 Ryan Road, Mount Isa, QLD 4825
Contact: Daniel Cooper
Phone: 07 4743 5304 Fax: 07 4743 6367
Mobile: 0408 747 468
Email: dcooper@dthproducts.com

Townsville

98 Tully Street, South Townsville, QLD 4810
Phone / Fax: 07 4721 0060 Mobile: 0422 091 770

Contact: Peter Helm
Email: phelm@dthproducts.com

Rockhampton

Melbourne
286 Wolseley Place, Thomastown, Vic 3074
Phone: 03 9462 2824  Fax: 03 9462 3473
Contact: Robert Power Mobile: 0417 587 925
Email: rpower@dthproducts.com

 

Sydney

5/19 Boden Road, Seven Hills, NSW 2147
Phone: 02 9674 9599  Fax:  02 9674 9533
Contact: Robert Bradley  Mobile: 0429 992 818
Email: rbradley@dthproducts.com

E

EAGLE EQUIPMENT AUSTRALIA PTY LTD
1717 Ipswich Road, Rocklea, Qld 4106
Phone: 07 3255 6355 Fax 07 3216 7590
Email: markw@eagleequipment.com.au
Contact: Mark Whitaker
Mobile: 0424 134 670

National Distributor for "Furukawa" Rock Drilling Equipment

EAST COAST PIPE SUPPLIES
138 Pineapple Street, Zillmere,  Qld, 4034
Phone: 07 3863 6100, Fax 07 3863 1700
Email: info@eastcoastpipe.com.au
Website: www.eastcoastpipe.com.au
Contact: Graeme Beikoff
Mobile: 0417 762 972

We stock a complete range of steel casing in diameters from 88.9mm OD to 1219mm OK, conforming to AS1396. A complete cutting service is available at our Brisbane facility and goods can be despatched to any location in Australia and the Pacific rim.

EDM SUPPLIES
49 Barkers Rd, Nerimbera,  Qld 4701
Phone: 0447 348 351 Fax 07 4934 8336
Email: edmsupplies@bigpond.com
Contact: Tony Barker
Mobile: 0447 348 351

EDM SUPPLIES provides consumables to the Exploration, Drilling and Mining Sectors.

Products we supply include PVC, steel and fibreglass casings, blade bits, PCD bits, down hole hammers and bits, drill rods, subs and stabilisers, core barrels and accessories, mud pump parts, drilling fluids and lubricants, concrete plugs, PVC caps, core trays, plastic bags, polywoven sacks, survey stakes, flagging tapes, spray and mark paints, all geological supplies and safety products.

We also offer a prompt refurbishment service for tungsten carbide core bits, reamers and PCD bits.

ENERGY POWER SYSTEMS AUSTRALIA PTY LTD
47-51 Westpool Drive, Hallam, Vic 3803
Phone: 03 9703 4000 Fax: 08 9703 4004
Website: www.energypower.com.au
Contact: Anthony Spence-Fletcher

Branch offices:

New South Wales
1 Holmes Road, Minto, NSW, 2566
Phone (02)8796 9200 Fax: (02) 8796 9299
Contact: Kim Howlett (0417) 357 423
Email: kim.howlett@energypower.com.au
Contact: Ken Fackler (0417) 357 434
Email: ken.fackler@energypower.com.au

Northern Territory
25 Wishart Road, Berrimah, NT, 0828
Contact: Phil Brushett (0429) 311 637
Email: phil.brushett@energypower.com.au

Queensland
42 Colebard Street East, Acacia Ridge, Qld, 4110
Contact: David Smith ( 0417) 357 414
Email: David.Smith@energypower.com.au

South Australia
299 Churchill Road, Prospect, SA, 5082
Contact: Brian Williams (0417) 357 409
Email: Brian Williams@energypower.com.au

Victoria
47-51 Westpool Drive, Hallam, Vic, 3803
Phone:(03) 9703 4000 Fax: (03) 9703 4004
Contact: David Heard (0417) 357 379
Email: david.heard@energypower.com.au
Contact: Peter Wootton (0417) 357 408
Email: peter.wootton@energypower.com.au

Western Australia
17 Adams Drive, Welshpool, WA 6106
Phone: 08 9442 8500 Fax: 08 9442 8555 
Email: robert.eamer@energypower.com.au

EPSA are the national distributor of Caterpillar Stationary Engines, Generator Sets, Truck Engines, Turn Key Power Stations, Marine Engines and Project Management services. We specialise in the development and commissioning of energy and power solutions for our diverse customer base. Drawing on the strengths and innovative nature of Caterpillar products, our alliance with Caterpillar, and the Caterpilar Dealer group, we provide our customers with the highest level of technical knowledge and after sales support available within Australia and around the world.

 

Branch offices:
Chatswood, NSW
Unit 1/28 Barcoo Street, Chatswood, NSW 2067
Phone: 02 9417 1513  Fax: 02 9417 7669
Email: sydney@enviroequip.com

Contact: Matt Scaddan

Brisbane Qld

Unit 2/5 Ross Street, Newstead, Qld 4006

Phone: 07 3852 6111  Fax: 07 3852 6155

Email: brisbane@enviroequip.com
Contact John Cosgrove

Perth WA
Unit 4/100 Belmont Ave, Belmont, WA 6104

Phone: 08 9477 5777 Fax: 08 9477 3777

Email: perth@enviroequip.com

Contact: Gaurav Kanwar

Auckland NZ
244 Bush Rd, Albany, Auckland, New Zealand
Phone: +64 09 377 5766  Fax +64 09 377 5768
Email: nz@enviroequip.com

Contact: Damian Roach

EnviroEquip is a leading supplier of equipment and instrumentation for the monitoring, sampling and remediation of water, soil and air. We specialise in sales and rentals of a large range of products for the environmental industry.

EVH DRILL ENGINEERING PTY LTD
61 Austin Ave, Kenwick, WA 6107
Phone: 61 8 9493 7133, Fax: 61 8 9493 0733
Mobile: 0412 955 287
Email:evhdrill@bigpond.net.au

Website: www.evh.com.au

Contact: Kevin Ewing

Manufacturers of multipurpose drills for mineral exploration, environmental, geotechnical and waterwell hole with difficult site access.

Sampling systems for geotechnical and environmental testing.

Auger products and gemco drill spares.

 

EZIPROBE AUSTRALIA PTY LTD
Unit 11 / 78-80 Bayfield Road, Bayswater, Vic 3153
Phone: 03 9720 4401  Fax: 03 9720 4402
Mobile: 0429 101 166
Email: eziprobe@geotechsystems.com.au
Website: www.eziprobe.com.au
Contact: John Lakeland

Type of operations: Auger, direct push
Specialty sectors: Environmental, Site investigations, foundations.

Eziprobe Australia P/L manufacture small to medium soil sampling rigs suitable for geotechnical and environmental sampling. Using the latest in Push Tube equipment, Eziprobe Australia will build a customised sampling rig to suit you! We offer a choice of carrier vehicles from Dingo mini diggers to Landcruisers to light trucks. Our systems offer simple and efficient sampling of soil, groundwater and soil gas to a depth of 15m.

 

F

                 

FLUIDSTAR
Unit 3, 1 General MacArthur Pl., Redbank, QLD 4301
Contacts: Dan Quinn/Jason Hudson
Phone: (07) 3288 4480 Fax: (07) 3288 4646
Mobile: 0400 195 406 / 0407 145 953
Email: dquinn@fluidstar.com.au
             jhudson@fluidstar.com.au
Website: www.fluidstar.com.au

Branch offices:

PO Box 3030, Kingsley, WA 6026
Phone: (08) 9390 9652 Fax: Fax: (08) 9390 0550
General email: adminwa@fluidstar.com.au
Contact: David Williams Mobile: 0437 180 007
Email: dwilliams@fluidstar.com.au
Contact: Sunia van Niekerk Mobile: 0400 331 440
Email: sunia@fluidstar.com.au
Contact: Tim Turner Mobile: 0488 759 409
Email: tturner@fluidstar.com.au

Adelaide
6-132/136 Gray Street, Adelaide, SA 5000
Contact: Keith Arnett
Phone: (08) 8221 6435 Fax: (08) 8221 5139
Mobile: 0448 751 790
Email: karnett@fluidstar.com.au

FluidStar supplies both the Australian and international markets with Drilling Fluids to the mineral, exploration, waterwell, HDD, and civil construction industries. By having assured service, competitive pricing and a complete range of performance-proven and innovative mud products, FluidStar gives you a real alternative for your drilling fluid requirements.

 

       

FOCUS PRODUCTS PTY LTD

35 Moreton St, Heathwood, Qld 4011

Phone: 1300 1 36287 Fax: 1300 2 36287

Mobile: 0420 908 144

Email: glenn@focusproducts.com.au
Website: www.focusproducts.com.au

Contact: Glenn Jones

About Focus Products - Drilling

Focus Products Pty Ltd was formed in 1991 to provide a full service and product solution to the Australian retail pool market. In 2006 Focus Products expanded into the Drilling Industry to extend the same outstanding service. Our operations started humbly in Brisbane, Queensland and have expanded into Victoria, New South Wales, South Australia, Western Australia and Northern Territory. The corporate offices are based in Brisbane where we continue to embrace growth whilst delivering excellence in service and quality to our customers. We currently have our own distribution centres located in Brisbane (head office), Melbourne, Perth and Sydney.

Our competitively priced product range covers all the needs required for the Drilling Industry. We supply a comprehensive range of PVC Pipes, fittings and C- Bridges.
Focus Products also has a full range of AS1477 Pressure Pipe all made to the Australian Standards. The pipe size range is from 20mm up to 300mm. A full range of pressure fittings are also available. All products are available Australia wide.

Focus Products is pleased to announce the release of the exciting new product the “C-Bridge” which is a cement bridge. The “C-Bridge” is a neoprene rubber bridge designed as a seal between the PVC casing and the bore hole wall. The “C-Bridge” can be used for grout sealing of a bore.

The sizes that are available are 4 inch to 7 inch, 5 inch to 8 inch, 6 inch to 10 inch. All “C-Bridges” are designed to only fit AS1477 Series 1 UPVC Pressure Pipe made to the Australian Standards. The 4 inch “C-Bridge” fits very neatly over 4 inch (100mm) AS1477 Pressure Pipe which has an outside diameter of 114.3mm. The 5 inch fits (125mm) an outside diameter of 140.2mm with the 6 inch (150mm) fitting an outside diameter of 160.25mm.

This new and exciting “C-Bridge” now gives another economical option for completing a bore as well as offering a more professional alternative at a very affordable price.

Relationships with our customers are important to us. Our ongoing customer care program involves understanding your business, providing after hours support and priority delivery. The sales division of the Company is structured to give maximum accessibility to our valued customer.

Our research and development team are actively seeking new ways to do things better; to develop better products and provide better service.

Philosophy

Our philosophy is simple: service, integrity, competitive prices and technical excellence. Our consistent growth over recent years is due to customer loyalty and our ongoing commitment to developing new and exciting products, and deliver training programs on how best to use them.

At Focus Products, we value knowledge, experience and a spirit of inquiry. We stay in touch with the markets and businesses we serve to ensure we understand the issues most important to them.

We strongly encourage our team to actively share and transfer knowledge and ensure our clients are kept abreast of key industry issues and trends. This and other forms of thought leadership are part of the Focus Products way.

To do this, we draw on all the resources of our network. This approach, which we call connected thinking, is what sets Focus Products apart.

FOREMOST AUSTRALIA PTY LTD

4 Karen Place, Nambour Heights, Qld 4560

Phone: 07 5441 1667 Fax: 07 5441 1744

Email: foremostoz@bigpond.com

Contact: Bob Brown

Mobile: 0418 932 095
Website: www.foremostoz.com.au

Specialist Sector: Blast Hole

Australian distributor of Foremost Products including:

Shock Subs - Floating Cushion Connectors - Deck Bushings - Rod Loaders and Foremost Mobile Products.

Other Products manufactured by Foremost include:

Tracked Vehicles - Exploration Rigs - Shallow Oil & Gas Rigs - Coiled Tubing Units and Dual Rotary Rigs

.
Foremost Australia also has a state of the art Service Centre located in Perth for cost effective repairs and re-builds of Shock Subs and Floating Cushion Connectors.

FORDIA SOUTH EAST ASIA
7 Lloyd Street, St Marys, SA 5042
Phone: 08 8374 1800 Fax: 08 8374 1811
Mobile: 0417 806 725
Email: fordiasea@fordia.com
Website: www.fordia.com
Contact: Charlie Younger

Branch office:
Unit 2, 14 Atbara Street, Kalgoorlie, WA 6430
Contact: Charlie Younger
Phone: 08 9021 1669 Fax: 08 9021 1991

Fordia Group South East Asia has one clear focus - to provide the best diamond-drilling tools and equipment for the world's leading mineral drilling exploration companies. Fordia Group manufactures world-class brands such as Shark, Shark Advanced, T-Extreme, Vulcan, Rhino, Gator and supplies Core barrel spares, rod grease, water pumps, Rigid wrenches and Flexit survey tools.
The Group is known for its innovation - whether the implementation of new products, the development of high service standards or the daily interaction with clients. No matter what a drilling site needs, Fordia South East Asia is your single source for drilling tools and equipment.    

 

FRANKLIN ELECTRIC (AUST) P/L
106-110 Micro Circuit, Dandenong Sth, Vic 3175
Phone: 03 9799 5000,  Fax  03 9799 5050
Mobile: 0419 223 577
Email: feaustralia@fele.com
Website: www.franklin-electric.com
Contact: P. Richardson

 

Product Overview
• Franklin submersible borehole motors in 4”, 6”, 8”, 10” and 12” from 0.37 kW to 400kW.
• Franklin submersible borehole motors in 4”, 6” and 8” stainless steel up to 130m3/hr.
• Submersible motor and pump controls and protection.
• SubDrive constant pressure water systems.

Our Businesses
Franklin Electric is a global leader in the production and marketing of systems and components for the movement of water and automotive fuels. Recognised as a technical leader in its specialties, Franklin serves customers around the world in residential, commercial, agricultural, industrial, municipal and fuelling applications.

 

 

GEMINEX
PO Box 39318, Winnellie, N.T. 0821
Phone: 08 8947 0202,  Fax  08 8947 0275
After hours/Mobile: 0418 892 843
Email: geminex@geminex.com.au
Website: www.geminex.com.au
Contact: Lance Martin

Branch office:
N.T.

878 Stuart Highway, Pinelands, NT 0828

Phone: 08 8931 4144 Fax: 08 8931 4195

Email: twwp@geminex.com.au Mobile: 0418 804 425

Contact: Melissa Gilmour

S.A.

45-47 West Thebarton Rd. Thebarton, Adelaide, S.A. 5031

Phone: 08 8443 3868 Fax: 08 8443 4842

Email: jeff@geminex.com.au Mobile: 0409 007 970

Contact: Jeff Faust

Drilling consumables, safety equipment, industrial clothing & footwear, environmental spill control systems, safety signage, survey equipment, fire safety products, industrial/safety matting, packaging, geological supplies, drill resharpening, custom-made & corporate clothing, embroidery & screen print services, corporate promotional items (stubby coolers etc).